Zanussi ZCG62496XA Manual de usuario descargar pdf (Pagina 20)

The back lamp

1. Turn the lamp glass cover counterclockwise to

remove it.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300 °C heat-

resistant lamp.

4. Install the glass cover.

TROUBLESHOOTING

WARNING! Refer to Safety chapters.

WHAT TO DO IF...

Problem Possible cause Remedy

You cannot activate the appli-

ance.

The appliance is not connec-

ted to an electrical supply or it

is connected incorrectly.

Check if the appliance is cor-

rectly connected to the electri-

cal supply.

You cannot activate or operate

the hob.

The oven does not heat up.

The fuse is blown. Make sure that the fuse is the

cause of the malfunction. If the

fuse is blown again and again,

contact a qualified electrician.

The oven / hob display shows

an error code that is not in this

table.

There is an electrical fault. Deactivate the appliance with

the house fuse or the safety

switch in the fuse box and acti-

vate it again.

If the display shows the error

code again, contact the Cus-

tomer Care Department.

There is no spark when you try

to activate the spark generator.

The hob is not connected to an

electrical supply or it is con-

nected incorrectly.

Check if the hob is correctly

connected to the electrical

supply. Refer to the connection

diagram.

There is no spark when you try

to activate the spark generator.

The fuse is blown. Make sure that the fuse is the

cause of the malfunction. If the

fuse is blown again and again,

contact a qualified electrician.

There is no spark when you try

to activate the spark generator.

Burner cap and crown are

placed incorrectly.

Place the burner cap and

crown correctly.

The flame extinguishes immedi-

ately after ignition.

Thermocouple is not heated up

sufficiently.

After lightning the flame, keep

the spark generator activated

for equal or less than 10 sec-

onds

The flame ring is uneven. Burner crown is blocked with

food residues.

Make sure that the injector is

not blocked and the burner

crown is clean.

The burners do not work. There is no gas supply. Check the gas connection.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Comentarios a estos manuales

Sin comentarios

Zanussi ZCG62496XA Manual de usuario Pagina 20

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Zanussi ZCG62496XA