Zanussi ZGG62444SA Manual de usuario

ENZGG62444User ManualHobGB

For appliances installed in the Republic ofIreland please refer to the NSAI- Domestic GasInstallation I.S. 813 Current Editions Table Four.LocationThe

Adjustment of minimum levelTo adjust the minimum level of the burners:1. Light the burner.2. Turn the knob on the minimum position.3. Remove the knob.

Green and yellow - EarthBlue - NeutralBrown - LiveWARNING!A cut off plug inserted into a 13 ampsocket is a serious shock hazard.Ensure that the cut of

Kitchen unit with ovenThe electrical connection of the hob and theoven must be installed separately for safetyreasons and to let easy remove oven from

Gas burners for LPG G30/G31 28-30/37 mbarBURNER NORMALPOWERkWMINIMUMPOWERkWINJECTORMARK 1/100mmNOMINAL GAS FLOW g/hG30 28-30mbarG31 37 mbarRapid 2,8 0

www.zanussi.com 15

www.zanussi.com/shop867321560-A-192015

ContentsSafety information 2Safety instructions 3Product description 5Daily use 6Hints and tips 7Care and cleaning 7Troubleshooting 8Installation 9Tec

• Unattended cooking on a hob with fat or oil can be dangerousand may result in fire.• Never try to extinguish a fire with water, but switch off theap

• Before carrying out any operation make surethat the appliance is disconnected from thepower supply.• Make sure that the electrical information onthe

• Do not let cookware to boil dry.• Be careful not to let objects or cookware fallon the appliance. The surface can bedamaged.• Do not activate the co

Control knobSymbol Descriptionno gas supply / off positionSymbol Descriptionignition position / maximumgas supplyminimum gas supplyDaily useWARNING!Re

Turning the burner offTo put the flame out, turn the knob to the offposition .WARNING!Always turn the flame down orswitch it off before you remove th

necessary, remove stubborn stains with apaste cleaner.3. After you clean the pan supports, make surethat they are in correct positions.4. For the burn

Labels supplied with the accessoriesbagStick the adhesive labels as indicated below:MOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NO.03