
9
To programme the Oven to switch on and off
1. Carry out the "Cooking Duration" setting as described
in the relevant chapter.
2. Press time function button until the "End of Cooking"
function is selected and the relevant symbol
flashes. The control panel will display the end of cooking
time (that is, the actual time + cooking duration time)
(Fig. 12).
3. Press button to select the required end of cooking
time.
4. After the setting is carried out, the programmer will
wait 3 seconds and then start running.
5. The oven will switch on and off automatically. The end
of cooking will be marked by an acoustic alarm.
6. To switch off the acoustic alarm, press button .
If you press any other button the alarm will stop and
the control panel will display the symbols indicated in
Fig. 10. Then, you need to reset the programmer display
by pressing button .
The acoustic alarm will switch off automatically
after approximately two minutes.
To cancel the programme, simply cancel the Cooking
Duration Time.
To programme the Oven to switch off
1. Switch the oven on, place food in the oven, select
a cooking function and adjust the cooking tempe-
rature, if required.
2. Press time function button to select the
"Cooking Duration" function. The "Cooking Duration"
symbol will flash and the control panel will
display "0.00" (Fig. 9).
3. While the symbol is flashing, press button
to select the required time. Maximum time is 23
hours 59 minutes. The programmer will wait 3
seconds and then start running.
4. When cooking time is over, the oven will be switched
off automatically and an acoustic alarm will be heard
while the control panel will display "0.00".
5. To switch off the acoustic alarm, press button .
If you press any other button the alarm will stop
and the control panel will display the symbols
indicated in Fig. 10. Then, you need to reset the
programmer display by pressing button .
The acoustic alarm will switch off
automatically after approximately two
minutes.
To cancel the Cooking Duration Time:
—
press time function button until the symbol
flashes (Fig. 11).
—
press button to decrease the time until the
display shows "0.00" (Fig. 11).
Fig. 9
Fig. 11
Fig. 12
Fig. 10
To cancel the Minute Minder:
press time function button until the symbols and
flash.
Press button to decrease the time until "0.00" shows
in the display (Fig. 8).
Comentarios a estos manuales