Zanussi ZGF782CX Manual de usuario descargar pdf (Pagina 5)

Something Not Working?

If the hob is not working correctly, please carry out the following checks before contacting your local Service Force

Centre.

SYMPTOM

 There is no spark when lighting the gas

 The gas ring burns unevenly

SOLUTION

 Check that the unit is plugged in and the electrical

supply is switched on

 Check that the RCCB has not tripped (if fitted)

 Check the mains fuse has not blown

 Check the burner cap and crown have been

replaced correctly, e.g. after cleaning.

 Check the main jet is not blocked and the burner

crown is clear of food particles.

 Check the burner cap and crown have been

replaced correctly, e.g. after cleaning.

If after all these checks, your hob still does not operate

correctly, contact your local Service Force Centre.

Please note that it will be necessary to provide proof of

purchase for any in-guarantee service calls.

In-guarantee customers should ensure that the

above checks have been made as the engineer will

make a charge if the fault is not a mechanical or

electrical breakdown.

Fig. 1

YES NO

Using the Wok Stand

A wok stand is provided to enable you to use a round

bottomed wok on the hob. The wok stand must only be

used on the central burner, and should not be used with

any other type of wok or pan.

When fitting the wok stand, ensure the recesses in the

frame fit securely onto the bars of the pan supports, as

shown in the diagram.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Sin comentarios

Zanussi ZGF782CX Manual de usuario Pagina 5