Zanussi ZGG35214XS Manual de usuario descargar pdf (Pagina 8)

To replace the connection cable use

only H03V2V2-F T90 or equivalent

type. Make sure that the cable section

is applicable to the voltage load and

the working temperature. The yellow/

green earth wire (B) must be

approximately 2 cm longer than the

live and neutral wire (A).

A B

1. Connect the green and yellow (earth) wire to

the terminal which is marked with the letter 'E',

or the earth symbol , or coloured green and

yellow.

2. Connect the blue (neutral) wire to the terminal

which is marked with the letter 'N' or coloured

blue.

3. Connect the brown (live) wire to the terminal

which is marked with the letter 'L'. It must

always be connected to the network phase.

There must be no cut or stray strands of wire

present. The cord clamp must be correctly

attached to the outer sheath.

ASSEMBLY

30 mm

55 mm

40-50 mm

min. 650 mm

490 mm

min. 100 mm

min. 600 mm

270 mm

50 mm

400 mm

If a furniture unit is installed at a

distance of 400 mm above the

hob, there must be a minimum

safety distance of 50 mm to the

left or right from the edge of the

hob.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Sin comentarios

Zanussi ZGG35214XS Manual de usuario Pagina 8