Zanussi ZGG649ICY Manual de usuario descargar pdf (Pagina 11)

a) Sealing gasket

Before fitting the hob into the cut out, an adhesive

seal must be fitted to the underside outside edge (Fig.

3) of the hob. It is essential that no gaps are left in

this seal in order to prevent spillage near the hob

seeping into the cabinet below.

1) Remove the pan supports, the burners caps

and crowns and turn the hob upside down,

taking care the ignition candles are not

damaged in this operation.

2) Place the sealing gasket all around the glass

top edge as shown in diagram.

3) Fit the hob in the cut out and push it down

until the glass top and the working top make

contact, as shown in diagram.

FO 2108

FO 2107

☞

Fitting the hob to the worktop

1 2 ... 6 7 8 9 10 11 12 13 14

Sin comentarios

Zanussi ZGG649ICY Manual de usuario Pagina 11