Zanussi ZGG65414SA Manual de usuario descargar pdf (Pagina 11)

ing and check that the burner crown holes are

not obstructed.

Periodic maintenance

Periodically speak your local Service Force

Centre to check the conditions of the gas sup-

ply pipe and the pressure adjuster, if fitted.

What to do if…

Problem Possible cause Remedy

There is no spark when lighting

the gas

• There is no electrical supply • Make sure that the unit is con-

nected and the electrical supply

is switched on.

• Control the fuse. If the fuse is

released more than one time,

refer to a qualified electrician.

• Burner cap and crown are

placed uneven

• Make sure that the burner cap

and crown are in correct posi-

tions.

The flame is blow out immediately

after ignition

• Thermocouple is not heated

sufficient

• After lightning the flame, keep

the knob pushed for approxi-

mately 5 seconds.

The gas ring burns unevenly • Burner crown is blocked with

food residues

• Make sure that the injector is

not blocked and the burner

crown is clear of food particles.

www.zanussi.com

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Sin comentarios

Zanussi ZGG65414SA Manual de usuario Pagina 11