Zanussi ZGG66424 Manual de usuario

ENUser manualHobZGG66424IE GB

Warning! Do not use abrasive cleaners, steel woolpads or acids. They can cause damage to theappliance.Scratches or dark stains on the surface have no

Problem Possible cause RemedyThe flame is blow out immediately af-ter ignition• Thermocouple is not heated suffi-cient• After lightning the flame, kee

Heat inputTriple Crown burner: 4.0 kWSemi-rapid burner: 2.0 kWAuxiliary burner: 1.0 kWTOTAL POWER: G20 (2H) 20 mbar = 9 kWG30 (3+) 28-30 mbar =654 g/h

13www.zanussi.com

14 www.zanussi.com

15www.zanussi.com

www.zanussi.com/shop 397225901-A-492011

ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4Product description _ _ _ _

pliance or hot cookware. Do not let the electricitybonds tangle.Installation• You must read these instructions. The manufacturer isnot responsible for

– Cut off the mains cable where it connects with theappliance and discard it.– Flat the external gas pipes if there are fitted.– Speak to your local a

not come in touch with mobile parts or they are notsqueezed. Also be careful when the hob is put togetherwith an oven.Important! It is important to in

Electrical RequirementsPermanent electrical installation must comply with the lat-est I.E.E. Regulations and local Electricity Board regula-tions. For

BAA) supplied sealB) supplied bracketsPossibilities for insertionKitchen unit with doorThe panel installed below the hob must be easy to removeand let

Control knobsSymbol Descriptionno gas supply / off posi-tionSymbol Description ignition position / maxi-mum gas supplyminimum gas supplyOperationIgnit

If the burner accidentally goes out, turn the controlknob to the off position and try to light the burneragain after minimum 1 minute.The spark genera