Zanussi ZGG742EX Manual de usuario descargar pdf (Pagina 9)

9

How to turn off a burner

1. To turn off a burner press the relevant

Burner Ignition Touch Control . All the

flame level indicators go off.

The residual heat indicator remains on

until the pan support and the burner have

cooled down.

In case of ignition failure

The hob ignition device generates a series

of small sparks for about 6 seconds.

If the flame does not light during this period,

the gas flow to the burner is interrupted.

After 3 seconds, the ignition device

automatically repeats the ignition procedure

for another 6 seconds.

After three failed ignition attempts, a safety

device is set on the burner. The flame level

indicators flash.

Caution! When the safety device is

set on a burner, the burner controls

cannot be operated for about 60

seconds.





- If touch control is selected, the

burner automatically lights at medium

flame level (three flame level indicators

illuminate).

4. To adjust the burner flame level, use the

Increasing or Decreasing Touch

Control.

The residual heat indicator lights up

immediately after the burner is lit.

This means that the cooking zone is

getting hot: the indicator remains on until

the pan support and the burner have

cooled down.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 39 40

Comentarios a estos manuales

Sin comentarios