Zanussi ZGP982X Manual de usuario descargar pdf (Pagina 11)

Carry out the installation of the hob as follows (follow

also the instructions given on the Assembly and cut

outlines supplied with the appliance):

1) measure the worktop for the exact positioning of

the hob;

2) make the holes for the gas and electric pipe outlet

and the safety holes to block the hob to the worktop

(follow the instructions given on the Assembly

and cut outlines - see fig. 1);

3) screw the traction pins supplied with the appliance

into the holes situated under the hob and adjust

their height (according to the worktop height);

4) place the hob on the worktop (paying attention to

insert the traction pins into the safety holes of the

worktop - fig. 1);

5) push the hob ahead towards the back of the

worktop, and fix it to the worktop (fig. 2).

Fitting the hob to the worktop

1 - Holes for the gas and electric pipe outlet

2 - Safety holes to block the hob to the worktop

3 - Traction pins

FO 2537

Fig. 1

80 MIN

FO 2538

Fig. 2

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Sin comentarios

Zanussi ZGP982X Manual de usuario Pagina 11