Zanussi PNL49 Manual de usuario descargar pdf (Pagina 9)

9

!

If you cannot light the flame even after

several attempts, check the "cap" (A) and

“crown” (B) are in the correct position.

In the absence of electricity, ignition can

occur without the electrical device; in this case

approach the burner with a flame, push the re-

levant knob down and turn it anti-clockwise until

it reaches the "maximum" position.

To switch off burners

To put the flame out, turn the knob to the

symbol ( ).

If the burner accidentally goes out, turn

the control knob to the "off" position and

wait for at least 1 minute before trying

to light the burner again.

Take care when frying food in hot oil or

fat, as the overheated splashes could

easily ignite.

When switching on the mains, after instal-

lation or a power cut, it is quite normal for

the spark generator to be activated auto-

matically.

The hob lid

In order to make the appliance match

with the kitchen design, a lid can be fitted

on the hob.

- The lid (available on request) is meant to

avoid dust to settle on the hob, when it is

closed, and to collect splashes of oil or fat,

when it is open. Do not use it for any other

purpose.

- Always wipe off any splash of liquid before

opening the lid.

- Always clean the lid from cooking residues

before opening it or taking it off.

WARNING! The crystal lid can splinter

when overheated. Always ensure all

the burners are off before closing it.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 39 40

Comentarios a estos manuales

Sin comentarios