Zanussi PNL49 Manual de usuario descargar pdf (Pagina 5)

SOLUTION

u Check that the unit is plugged in and the electrical

supply is switched on.

u Check the mains fuse has not blown.

u Check the burner cap and crown have been

replaced correctly, e.g. after cleaning.

u Check the main jet is not blocked and the burner

crown is clear of food particles.

u Check the burner cap and crown have been

replaced correctly, e.g. after cleaning.

Something Not Working?

If the appliance is not working correctly, please carry out the following checks before contacting your local Service

Centre.

SYMPTOM

n There is no spark when lighting the gas

n The gas ring burns unevenly

If after all these checks, your appliance still does not operate correctly, contact your local Service Centre.

Overall dimensions

Width: 580 mm.

Depth: 500 mm.

Height: 84 mm.

Cut out dimensions

Width: 550 mm.

Depth: 470 mm.

Instructions for the Installer

Engineer technical data

Supply Connections

Gas:

RC 1/2 inch (1/2 inch male) Rear right hand corner

Electric:

230 V 50Hz supply, 3 core flexible cable with non

rewireable plug.

Appliance Gas supply: LPG 30 mbar

Appliance Class: 3

Appliance category: I 3

Burner Nominal Power LPG (Butane "A") Diameter Feeding

Tap. By-Pass Pressure

kW kCal/h Nozzle g/h mbar (*)

Auxiliary (dia. 42 mm.) 0,95 792 50 75 28

Semi-rapid (dia. 57 mm.) 1,60 1329 65 126 35 30

Powered Rapid (dia. 90 mm.) 2,9 2406 85 228 45

(*) 1 mbar = 10 mm. water coloumn.

1 2 3 4 5 6 7 8

Sin comentarios

Zanussi PNL49 Manual de usuario Pagina 5