Zanussi ZC650 Manual de usuario descargar pdf (Pagina 17)

Gas connection

Your cooker is delivered adjusted for the

kind of gas stated on the rating plate.

It might be necessary to pass to another

kind of gas, different to the one it is preset

to. Under these circumstances follow the

instructions bellow.

For best efficiency, lowest

consumption and a longer length of life of

your cooker, the manifold gas pressure has

to respect the values shown in table no. 1

If the appliance is supplied with Butane or

Propane gas check that from the pressure

regulator, the pressure for Butane and for

Propane is 30 mbar.

CONNECTION TO THE GAS SUPPLY

The gas cooker can be connected to the

gas supply on the right side. The gas inlet

on the appliance is a 1/2" gas parallel male

type. There are 3 possibilities for connecting

− rigid pipe with gasket.

− pipe with mechanical end.

− rubber hose pipe

In case of rubber hose pipe screw on the

inlet the hose nipple corresponding to the

type of gas supposed to be used

interspersing also a gasket.

B A C E

A – Distributor pipe

B – Nut 1/2"

C – Gasket

D – Hose nipple

E – Elbow

Connection by rubber hose to gas supply has to be done so that it should not pass behind

the cooker.

1 2 ... 12 13 14 15 16 17 18 19 20

Sin comentarios

Zanussi ZC650 Manual de usuario Pagina 17