Zanussi ZCM900X Manual de usuario descargar pdf (Pagina 23)

INSTALLATION

Positioning

Remove all the packaging and install the cooker

in a dry, ventilated room not near curtains, paper,

alcohol, petrol etc.

The appliance must be set on a heatproof, level

floor.

This appliance is approved to class “Y” (EN60335-

2-6 plus subsequent amendments). This means

that the appliance can be installed up against a

wall with a distance of not less than 20mm (fig 2)

or inserted between 2 walls (fig 1). Only one side

wall can exceed the height of the work surface

and it must have a distance of 70mm from the

edge of the cooker.

Any walls of the adjacent kitchen furniture and the

wall behind the cooker must be made with heat

resistant material that can withstand a minimum

overtemperature of 65K.

Any overhanging cabinetry installed above the

work surface must be located at a distance of no

less than 700mm.

The cooking appliance must be fitted

with a stability chain firmly secured to the

wall

Ventilation

The room containing the cooker should have an

air supply in accordance with B.S. 5440: Part 2:

Current Editions.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29 30

Sin comentarios

Zanussi ZCM900X Manual de usuario Pagina 23