Zanussi ZCV642MX Manual de usuario descargar pdf (Pagina 16)

We recommend that you write the data here:

Model (MOD.) .........................................

Product number (PNC) .........................................

Serial number (S.N.) .........................................

Installation

Warning! Refer to "Safety information"

chapter.

Technical data

Dimensions

Height 893 - 912 mm

Width 600 mm

Depth 600 mm

Top oven capacity 37 l

Main oven capacity 74 l

Location of the appliance

You can install your freestanding appliance with

cabinets on one or two sides and in the corner.

Minimum distances

Dimension mm

A 2

Dimension mm

B 685

Levelling

Use small feet on the bottom of appliance to

set same level of cooker top surface with other

surfaces

The anti-tilt protection

Caution! You must install the anti-tilt

protection (A+B). If you do not install it the

appliance can tilt.

Before you install anti-tilt protection, adjust the

appliance to the correct height.

The anti-tilt protection has two parts (A+B).

You can find the anti-tilt protection (B) on right

or left side of the rear wall of the appliance

(See fig. 1). You must install the anti-tilt protec-

tion (A) on the wall. The distance of the hole of

the anti-tilt protection (A) from the floor is about

816 mm. Make sure you install the anti-tilt pro-

tection (A) at the correct height. Screw it into

the solid material or use applicable reinforce-

ment.

Check that the anti-tilt protection projects mini-

mum 20 mm into the hole in the back of the ap-

pliance (B) when you push the appliance (See

fig. 2). If the space between the bench cup-

boards is greater than the width of the appli-

www.zanussi.com

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios

Zanussi ZCV642MX Manual de usuario Pagina 16

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Zanussi ZCV642MX