Zanussi ZGL62ITX Manual de usuario descargar pdf (Pagina 19)

Fitting the Hob into the Worktop

Carry out the building in of the hob as follows:

1. put the seals supplied with the hob, on the edges of the cut out taking

care that the seals meet without

overlapping;

2. place the hob in the cut out, taking

care that it is centred;

3. fix the hob with the relevant fixing

clamps and screws, as shown in the

diagram. When the screws have

been tightened, the excess seal can

be removed.

The edge of the hob forms a double

seal which prevents the ingress of

liquids.

SealSeal

Seal

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Sin comentarios

Zanussi ZGL62ITX Manual de usuario Pagina 19