Zanussi ZKL 850 LX Manual de usuario descargar pdf (Pagina 14)

Safety Instructions for

the Installer

• The mains connection must be with a cable with a

plug or there must be a disconnecting device with

at least 3 mm contact opening in the existing do-

mestic electrical installation, which disconnects

the dishwasher completely from the mains supply

in accordance with NIN 2000.

• In respect of fire protection, this appliance corres-

ponds to type Y (EN 60 335-2-6). Only this type

of appliance may be installed with a high cupboard

or wall on one side.

• It is not permitted to fit drawers below the cooking

surface.

• Protection against electric shock must be provided

by the installation.

• The kitchen unit in which the appliance is fitted

must satisfy the requirements of DIN 68930 in re-

spect of stability.

• Built-in ovens and cooking surfaces are fitted with

special connector systems. They may only be

combined with appliances with a matching system.

• All cut surfaces are to be sealed with a suitable

sealant for protection against moisture.

• On tiled work surfaces, the joints in the area where

the hob sits on the surface must be completely fil-

led with grout.

• On natural, artificial stone, or ceramic tops, the

snap action springs must be bonded in place.

• Ensure that the seal is correctly seated in the frame

and that it is seated against the work surface wi-

thout leaving any gaps. Additional silicon sealant

must not be applied, this will make removal more

difficult in the event of the need for service.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19

Sin comentarios

Zanussi ZKL 850 LX Manual de usuario Pagina 14