Zanussi ZKL64X Manual de usuario descargar pdf (Pagina 11)

Installation Instructions

Safety instructions

The laws, ordinances, directives and standards in

force in the country of use are to be followed (safety

regulations, proper recycling in accordance with the

regulations, etc.)

Installation may only be carried out by a qualified

electrician.

The minimum distances to other appliances and

units are to be observed.

A protective floor must be installed under the ap-

pliance.

The cut surfaces of the worktop are to be protected

against moisture using a suitable sealant.

The sealant seals the appliance to the work top with

no gap.

The sealant seals the appliance to the work top with

no gap.

Do not use silicon sealant between the appliance

and the work top.

Avoid installing the appliance next to doors and un-

der windows. Otherwise hot cookware may be

knocked off the rings when doors and windows are

opened.

1 WARNING!

Risk of injury from electrical current.

• The electrical mains terminal is live.

• Observe connection schematic.

• Observe electrical safety rules.

• Ensure anti-shock protection through correct in-

stallation by a qualified electrician.

• The appliance must be connected to the electrical

supply by a qualified electrician.

1 IMPORTANT!

Risk of injury from electrical current.

Loose and inappropriate plug and socket connec-

tions can make the terminal overheat.

• Have the clamping joints correctedly installed by a

qualified electrician.

• Use strain relief clamp on cable.

• In the event of single-phase or two-phase connec-

tion, the appropriate mains cable of type H05BB-F

Tmax 90° (or higher) must be used.

• If this appliance’s mains cable is damaged, it must

be replaced by a special cable (type H05BB-F

Tmax 90°; or higher). Please contact your local

Service Force Center for further advice.

A device must be provided in the electrical installa-

tion which allows the appliance to be disconnected

from the mains at all poles with a contact opening

width of at least 3 mm

Suitable isolation devices include line protecting cut-

outs, fuses (screw type fuses are to be removed from

the holder), earth leakage trips and contactors.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comentarios a estos manuales

Sin comentarios

Modelos	Tipo de documento
SeaTalk-SeaTalk ng	Especificaciones Raymarine SeaTalk-SeaTalk ng Specifications, 28 paginas
SmartPilot SPX-30	Manual de usuario SPX SmartPilot System Installasjon SPX 10, SPX 30, 54 paginas
ST1000+	Especificaciones Raymarine ST1000+ Specifications [en] , 8 paginas
ST1000 Plus	Especificaciones Raymarine ST1000 Plus Specifications, 76 paginas
ST2000+	Manual de usuario Installer et utiliser un pilote ST2000+ sur un First 30, 7 paginas
ST40	Especificaciones Raymarine ST40 Product specifications, 43 paginas Especificaciones Raymarine ST40 Product specifications, 53 paginas Manual de usuario ST40 BIDATA manuale, 56 paginas
ST50 plus	Especificaciones Raymarine ST50 plus Product specifications, 21 paginas Manual de usuario Distributed by Any reference to Raytheon or RTN in this, 18 paginas
ST60	Manual de instalación Raymarine ST60 Installation manual, 50 paginas Especificaciones Raymarine ST60 Specifications, 52 paginas Especificaciones Raymarine ST60 Specifications, 54 paginas
ST70	Guía de instalación Raymarine ST70 Installation guide [de] [en] [fr] , 26 paginas Guía de instalación Raymarine ST70 Installation guide, 48 paginas
ST70 Instrument	Manual de usuario Raymarine ST70 Instrument User manual, 12 paginas Guía de instalación Raymarine ST70 Instrument Installation guide, 28 paginas
ST80	Guía de instalación Raymarine ST80 Installation guide, 15 paginas

Zanussi ZKL64X Manual de usuario Pagina 11

Comentarios a estos manuales

Raymarine No manuales de usuario

Zanussi ZKL64X Manual de usuario Pagina 11

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Zanussi ZKL64X

Raymarine No manuales de usuario