Zanussi ZCC5061 Manual de usuario descargar pdf (Pagina 25)

24

Replacement of the nozzles

Every appliance has spare nozzles for every

gas. The whole of every nozzle is marked in

microns on the nozzle.

For changing the nozzles:

1. Remove the pan support;

2. Remove the burners;

3. Using a socket spanner 7 unscrew the

nozzles (fig. 17) and replace them with

those required for the type of gas in use

(see table no. 1).

Put in place the burners and the pan

supports.

Adjustment of minimum level of hob

burners.

When changing the gas type watch that the

minimum level be correct. A regular flame at

minimum level is about 4 mm; check that,

turning quickly the knob from the maximum

to the minimum position, the burner doesn’t

go out.

Flame adjustment

1. Light the burner

2. Turn the knob to minimum level

3. Pull out the knob

4. Unscrew or screw the pin (on the right of

tap axle, fig. 18) until a regular small

flame is obtained. For butane-propane

gas, screw totally the pin clockwise

5. Put in place the knob

6. Turn the knob several times from

maximum to minimum level for verifying the

flame steadiness.

fig. 17

fig. 18

1 2 ... 20 21 22 23 24 25

Comentarios a estos manuales

Sin comentarios