Zanussi ZGG753ICX Manual de usuario descargar pdf (Pagina 7)

These hobs can be inserted in a built-in kitchen unit

whose depth is between 550 and 600 mm. The hobs

dimensions are shown in Fig. 9.

The edge of the cut out must have a minimum distance

from the rear wall of 55 mm.

If there are side walls, or sides of the furniture unit near

the hob, the cut out edges must have a minimum

distance of 150 mm.

Hanging forniture units or hoods must be placed at 650

mm. minimum from the hob.

Fitting the hob to the worktop

Before fitting the hob into the cut out, an adhesive seal

must be fitted to the underside outside edge (Fig. 9) of

the hob. It is essential that no gaps are left in this seal

in order to prevent spillage near the hob seeping into the

cabinet below.

1) Remove the pan supports, the burners caps and

crowns and turn the hob upside down, taking care the

ignition candles are not damaged in this operation.

2) Place the sealing gasket all around the glass top

edge as shown in Fig. 9.

3) Fit the hob in the cut out and push it down until the

glass top and the working top come in touch, as shown

in Fig. 10.

sealing

gasket

Fig. 9

Fig. 10

FO 2320

FO 2321

680

510

Fig. 8

FO 2038

685

515

560

150 min

480

55 min.

A = Auxiliary burner

SR = Semirapid burner

R = Rapid Burner

Dimensions are given in

millimeters

Building In

1 2 3 4 5 6 7 8 9 10 11

Comentarios a estos manuales

Sin comentarios

Zanussi ZGG753ICX Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Zanussi ZGG753ICX