Zanussi ZEM8740FBA Manual de usuario descargar pdf (Pagina 8)

Power function

This function makes more power available to the

induction cooking zones. The function can be

activated for the induction cooking zone only for

a limited period of time. After this time the

induction cooking zone automatically sets back

to the highest heat setting.

Refer to “Technical information”

chapter.

To activate the function for a cooking

zone: touch . comes on.

To deactivate the function: change the heat

setting.

Timer

Count Down Timer

You can use this function to set how long the

cooking zone should operate for a single

cooking session.

First set the cooking zone then set the

function. You can set the heat setting before

or after you set the function.

To set the cooking zone: touch again and

again until the indicator of a necessary cooking

zone comes on.

To activate the function or change the

time: touch

or of the timer to set the

time (00 - 99 minutes). When the indicator of

the cooking zone starts to flash slowly the time

counts down.

To see the remaining time: set the cooking

zone with . The indicator of the cooking zone

starts to flash quickly. The display shows the

remaining time.

To deactivate the function: set the cooking

zone with and touch . The remaining time

counts back to 00. The indicator of the cooking

zone goes out.

When the time comes to an end, the

sound operates and 00 flashes. The

cooking zone deactivates.

To stop the sound: touch .

Minute Minder

You can use this function as a Minute Minder

when the hob is activated and the cooking

zones do not operate (the heat setting display

shows ).

To activate the function: touch . Touch

or of the timer to set the time. When the

time comes to an end, the sound operates and

00 flashes.

To stop the sound: touch .

The function has no effect on the

operation of the cooking zones.

STOP+GO

This function sets all cooking zones that operate

to the lowest heat setting.

When the function operates, you cannot change

the heat setting.

The function does not stop the timer functions.

To activate the function: touch .

comes on.

To deactivate the function: touch . The

previous heat setting comes on.

Lock

You can lock the control panel while cooking

zones operate. It prevents an accidental change

of the heat setting.

Set the heat setting first.

To activate the function: touch .

comes on for 4 seconds. The Timer stays on.

To deactivate the function: touch

. The

previous heat setting comes on.

When you deactivate the hob, you

also deactivate this function.

The Child Safety Device

This function prevents an accidental operation

of the hob.

To activate the function: activate the hob

with . Do not set the heat setting. Touch

for 4 seconds. comes on. Deactivate the

hob with .

To deactivate the function: activate the hob

with . Do not set the heat setting. Touch

8 www.zanussi.com

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Comentarios a estos manuales

Sin comentarios