Zanussi ZEV8648XBA Manual de usuario descargar pdf (Pagina 8)

RESIDUAL HEAT INDICATOR

WARNING! There is a risk of

burns from residual heat. The

indicators show the level of the

residual heat for the cooking zones

you are currently using. The indicators

may also come on for the neighbouring

cooking zones even if you are not

using them.

DAILY USE

WARNING! Refer to Safety chapters.

ACTIVATING AND DEACTIVATING

Touch for 1 second to activate or deactivate the

hob.

AUTOMATIC SWITCH OFF

The function deactivates the hob

automatically if:

• all cooking zones are deactivated,

• you do not set the heat setting after you activate

the hob,

• you spill something or put something on the

control panel for more than 10 seconds (a pan,

a cloth, etc.). An acoustic signal sounds and the

hob deactivates. Remove the object or clean the

control panel.

• you do not deactivate a cooking zone or change

the heat setting. After some time comes on

and the hob deactivates.

The relation between the heat setting and the

time after which the hob deactivates:

Heat setting

The hob deactivates

after

, 1 - 2

6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hour

THE HEAT SETTING

Touch to increase the heat setting. Touch to

decrease the heat setting. Touch and at the

same time to deactivate the cooking zone.

ACTIVATING AND DEACTIVATING THE

OUTER RINGS

You can adjust the surface you cook to the

dimension of the cookware.

Use sensor field:

To activate the outer ring: touch the sensor

field. The indicator comes on.

To activate more outer rings: touch the same

sensor field again. The subsequent indicator comes

on.

To deactivate the outer ring: touch the sensor

field until the indicator goes out.

When you activate the zone but do not

activate the outer ring the light that

comes out from the zone may cover

the outer ring. It does not mean that

the outer ring is activated. To see if the

ring is activated check the indicator.

AUTOMATIC HEAT UP

If you activate this function you can get a necessary

heat setting in a shorter time. The function sets the

highest heat setting for some time and then

decreases to the correct heat setting.

To activate the function the cooking

zone must be cold.

To activate the function for a cooking zone:

touch until the correct heat setting comes on.

After 3 seconds comes on.

To deactivate the function: touch .

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios

Zanussi ZEV8648XBA Manual de usuario Pagina 8

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Zanussi ZEV8648XBA