Zanussi ZGL62IX Manual de usuario

ENUser manualHobZGL62IGB

Important! Failure to ensure the correctassembly will cause leakage of gas.Important! Make sure that the gas supplypressure of the appliance obeys the

Before carrying out the connection, make sure:1. The limiter valve and the electrical systemcan take the appliance load (see the ratingplate)2. The su

BAA) supplied sealB) supplied bracketsCaution! Install the appliance only on aworktop with flat surface.Possibilities for insertionKitchen unit with d

Category: II2H3+Gas supply: G20 (2H) 20 mbarAppliance class: 3By-pass diametersBurner Ø By-pass in 1/100mm.Auxiliary 28Semi-rapid 32Rapid 42Gas burner

14 www.zanussi.com

15www.zanussi.com

www.zanussi.com/shop 397193202-A-512012

ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Product description _ _ _ _ _ _ _ _ _ _ _ _

• Unattended cooking on a hob with fat or oil can be dangerousand may result in fire.• Never try to extinguish a fire with water, but switch off the a

• Use only correct isolation devices: line pro-tecting cut-outs, fuses (screw type fuses re-moved from the holder), earth leakage tripsand contactors.

DisposalWarning! Risk of injury or suffocation.• Contact your municipal authority for informa-tion on how to discard the appliance correct-ly.• Discon

ABCA) Burner capB) Burner crownC) Ignition candleWarning! Do not keep the control knobpushed for more than 15 seconds.If the burner does not light aft

Care and cleaningWarning! Refer to the Safety chapters.Warning! Deactivate the appliance andlet it cool down before you clean it.Disconnect the applia

Problem Possible cause RemedyThe gas ring burns unevenly • Burner crown is blocked withfood residues• Make sure that the injector isnot blocked and th

Important safety requirementsThis hob must be installed in accordance withthe Gas Safety (Installation and Use) Regula-tions (Current Edition) and the