
Problem Possible cause Remedy
The appliance makes noises. Some metal parts of the appli-
ance expand and contract when
they heat up or cool down. The
noises are normal.
The flame colour is orange or yel-
low.
The flame can look orange or yel-
low in some areas of the burner.
This is normal.
The oven does not heat up. The oven is deactivated. Activate the oven.
The lamp does not operate. The lamp is defective. Replace the lamp.
Steam and condensation settle
on the food and in the cavity of
the oven.
You left the dish in the oven for
too long.
Do not leave the dishes in the
oven for longer than 15 - 20 mi-
nutes after the cooking process
ends.
The oven does not heat up. The clock is not set. Set the clock.
The oven does not heat up. The necessary settings are not
set.
Make sure that the settings are
correct.
The turnspit does not rotate. The turnspit is not correctly in-
stalled into the turnspit hole.
Refer to "Using the turnspit".
It takes too long to cook the
dishes or they cook too quickly.
The temperature is too low or too
high.
Adjust the temperature if neces-
sary. Follow the advice in the
user manual.
The display shows an error code
that is not in this table.
There is an electrical fault. Deactivate the oven with the
house fuse or the safety switch in
the fuse box and activate it again.
If the display shows the error
code again, contact the Custom-
er Care Department.
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove
the rating plate from the appliance cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
www.zanussi.com 21
Comentarios a estos manuales