Zanussi ZCG62396XA Manual de usuario descargar pdf (Pagina 23)

Gas burners for NATURAL GAS G20 20 mbar

BURNER NORMAL POWER

kW

REDUCED POWER kW INJECTOR MARK

1/100 mm

Triple Crown 4.0 1.80 146

Semi-rapid 2.0 0.45 96

Auxiliary 1.0 0.35 70

Oven 2.25 1.0 108

Grill 2.0 1.5 108

Gas burners for LPG G30 28-30 mbar

BURNER NORMAL POWER

kW

REDUCED POWER kW INJECTOR MARK

1/100 mm

Triple Crown 4.0 1.80 101

Semi-rapid 2.0 0.43 71

Auxiliary 1.0 0.35 50

Oven 2.25 1.0 71

Grill 2.0 1.5 71

Gas connection

The gas pipe in the appliance has two endings.

You can connect the gas supply to either one of

them. The pipe that is not used must be

clogged with the pipe closer, which added to

the appliance.

Use a fixed connections or use a flexible

stainless steel pipes in compliance with the

regulation in force. If you use flexible metallic

pipes, make sure they do not come in touch

with mobile parts and they are not squeezed.

Flexible nonmetal pipes connection

If you have an easy access to the connection,

you can use a flexible pipe. The flexible pipe

must be tightly attached by clamps.

In installation always use the pipe holder and

the gasket. The flexible pipe can be applied

when:

• it can not get hotter than room temperature,

higher than 30 °C,

• it is not longer than 1500 mm,

• it has no narrowing anywhere,

• it is not twisted or tighten,

• it does not get in touch with sharp edges or

corners,

• it's conditions can be easily checked.

When checking the flexible pipe make sure:

• it does not show cracks, cuts, marks of

burnings on the two ends and on its full

length,

• the material is not hardened, but shows its

correct elasticity,

• the fastening clamps are not rusted,

• expired term is not due.

If one or more defects are visible, do not repair

the pipe, but replace it.

www.zanussi.com 23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Comentarios a estos manuales

Sin comentarios