Zanussi ZGX65414BA Manual de usuario Pagina 1

GETTING STARTED?EASY.User ManualZGX65414EN User ManualHobGB

IMPORTANT SAFETY REQUIREMENTSThis hob must be installed in accordance with theGas Safety (Installation and Use) Regulations(Current Edition) and the I

INJECTORS REPLACEMENT1. Remove the pan supports.2. Remove the caps and crowns of the burner.3. With a socket spanner 7 remove the injectorsand replace

A BCDEA. Green and YellowB. 3 amp fuseC. BrownD. Cord clampE. BlueThe wires in the cord are coloured as follows:Green and yellow - EarthBlue - Neutral

ABA. supplied sealB. supplied bracketsCAUTION! Install the appliance onlyon a worktop with flat surface.POSSIBILITIES FOR INSERTIONThe panel installed

OTHER TECHNICAL DATATOTAL POWER:Gas original: G20 (2H) 20 mbar = 7,7 kWGas replacement: G30 (3+) 28-30 mbar = 545 g/hG31 (3+) 37 mbar = 536 g/hElectri

Energy efficiency per gas burner(EE gas burner)Centre rear - Semi-rapid 57.1%Left middle - Semi-rapid 57.9%Right middle - Rapid 54.3%Centre front - Au

WWW.ZANUSSI.COM/SHOP867315336-B-322015

SAFETY INFORMATIONBefore the installation and use of the appliance, carefully read thesupplied instructions. The manufacturer is not responsible if a

• Do not use a steam cleaner to clean the appliance.• If the glass ceramic surface / glass surface is cracked, switchoff the appliance to avoid the po

• Make sure that the electrical information on therating plate agrees with the power supply. If not,contact an electrician.• Make sure the appliance i

• Use only stable cookware with the correctshape and diameter larger than the dimensionsof the burners.• Make sure cookware is centrally positioned on

CONTROL KNOBSymbol Descriptionno gas supply / off positionignition position / maximumgas supplySymbol Descriptionminimum gas supplyDAILY USEWARNING! R

The spark generator can startautomatically when you switch on themains, after installation or a power cut.It is normal.TURNING THE BURNER OFFTo put th

PAN SUPPORTSThe pan supports are not resistant towashing in a dishwasher. They mustbe washed by hand.1. Remove the pan supports to easily clean thehob

Problem Possible cause RemedyThe flame ring is uneven. Burner crown is blocked withfood residues.Make sure that the injector isnot blocked and the bur