Zanussi ZGX65414BA Manual de usuario descargar pdf (Pagina 8)

PAN SUPPORTS

The pan supports are not resistant to

washing in a dishwasher. They must

be washed by hand.

1. Remove the pan supports to easily clean the

hob.

Be very careful when you replace

the pan supports to prevent the

hob top from damage.

2. The enamel coating occasionally can have

rough edges, so be careful when you wash the

pan supports by hand and dry them. If

necessary, remove stubborn stains with a paste

cleaner.

3. After you clean the pan supports, make sure

that they are in correct positions.

4. For the burner to operate correctly, make sure

that the arms of the pan supports are aligned

with the centre of the burner.

CLEANING THE HOB

• Remove immediately: melted plastic, plastic

foil, and food with sugar. If not, the dirt can

cause damage to the hob.

• Remove when the hob is sufficiently cool:

limescale rings, water rings, fat stains, shiny

metallic discoloration. Clean the hob with a

moist cloth and some detergent. After cleaning,

rub the hob dry with a soft cloth.

• To clean the enamelled parts, cap and crown,

wash them with warm soapy water and dry them

carefully before you put them back.

CLEANING THE SPARK PLUG

This feature is obtained through a ceramic ignition

candle with a metal electrode. Keep these

components well clean to prevent difficult lighting

and check that the burner crown holes are not

obstructed.

PERIODIC MAINTENANCE

Speak to your local Authorised Service Centre

periodically to check the conditions of the gas

supply pipe and the pressure adjuster, if fitted.

TROUBLESHOOTING

WARNING! Refer to Safety chapters.

WHAT TO DO IF...

Problem Possible cause Remedy

There is no spark when you try

to activate the spark generator.

The hob is not connected to an

electrical supply or it is con-

nected incorrectly.

Check if the hob is correctly

connected to the electrical

supply.

The fuse is released. Make sure that the fuse is the

cause of the malfunction. If the

fuse releases again and again,

contact a qualified electrician.

Burner cap and crown are

placed incorrectly.

Place the burner cap and

crown correctly.

The flame extinguishes immedi-

ately after ignition.

Thermocouple is not heated up

sufficiently.

After lightning the flame, keep

the knob pushed for equal or

less than 10 seconds.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios

Zanussi ZGX65414BA Manual de usuario Pagina 8

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Zanussi ZGX65414BA