Zanussi ZCG62496XA Manual de usuario descargar pdf (Pagina 18)

• If you have nonstick accessories, do not clean

them using aggressive agents, sharp-edged

objects or a dishwasher. It can cause damage

to the nonstick coating.

STAINLESS STEEL OR ALUMINIUM

APPLIANCES

Clean the oven door with a damp cloth

or sponge only. Dry it with a soft cloth.

Do not use steel wool, acids or

abrasive materials as they can damage

the oven surface. Clean the oven

control panel with the same

precautions.

REMOVING THE SHELF SUPPORTS

To clean the oven, remove the shelf supports.

1. Pull the front of the shelf support away from the

side wall.

2. Pull the rear end of the shelf support away from

the side wall and remove it.

Install the shelf supports in the opposite sequence.

CATALYTIC CLEANING

CAUTION! Do not clean the catalytic

surface with oven sprays, abrasive

cleaning agents, soap or other

cleaning agents. This will damage the

catalytic surface.

Spots or discolouration of the catalytic

surface have no effect on catalytic

properties.

WARNING! Keep children away when

you clean the oven at a high

temperature. The oven surface

becomes very hot and there is a risk of

burns.

Before activating the catalytic cleaning

remove all the accessories from the

oven.

The walls with a catalytic coating are self-cleaning.

They absorb fat which collects on the walls while

the appliance operates.

To support the self-cleaning procedure, heat the

empty oven on a regular basis.

1. Clean the oven floor with warm water and

washing up liquid, then dry it.

2. Set the function .

3. Set the maximum temperature and let oven

operate for 1 hour.

4. When the appliance is cool, clean it with a soft

and moist sponge.

CLEANING THE OVEN DOOR

The oven door has two panels of glass installed

one behind the other. To make the cleaning easier

remove the oven door.

WARNING! The oven door can close

if you try to remove the internal panel

of glass when the door is still

assembled.

Do not lose the screws.

1. Open the door fully and hold the two door

hinges.

2. Lift and turn the levers on the two hinges.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Comentarios a estos manuales

Sin comentarios

Zanussi ZCG62496XA Manual de usuario Pagina 18

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Zanussi ZCG62496XA