Zanussi ZCV660MW Manual de usuario descargar pdf (Pagina 17)

Warning! Bulb lamps used in this

appliance are special lamps for use only in

household appliances. Do not use them to

illuminate household rooms or parts of rooms. If

you need to replace a lamp, the replacement

lamp must have the same power and be for use

only in household appliances.

Before you change the oven lamp:

• Deactivate the appliance.

• Remove the fuses in the fuse box or deacti-

vate the circuit breaker.

• Put a cloth on the bottom of the oven. This

prevents from damage to the oven light and

glass cover.

Replacing the oven lamp:

1. Find the lamp glass cover at the back of

the cavity.

Turn the lamp glass cover counterclock-

wise to remove it.

2. Clean the glass cover.

3. Replace the oven lamp with an applicable

300 °C heat-resistant oven lamp.

Use only the same oven lamp type as the

replacement lamp. It must have the same

power and be for use only in household

appliances.

4. Install the glass cover.

What to do if…

Problem Possible cause Remedy

The appliance does not operate. The fuse in the fuse box is re-

leased.

Control the fuse. If the fuse is re-

leased more than one time, refer

to a qualified electrician.

The hob does not operate. The heat setting is not set. Set the heat setting.

The oven does not heat up. The clock is not set. Set the clock.

The oven does not heat up. The oven is not activated. Activate the oven.

The oven does not heat up. The necessary settings are not

set.

Make sure that the settings are

correct.

The oven lamp does not operate. The oven lamp is defective. Replace the oven lamp.

The display shows “0.00” and

"LED".

There was a power cut. Set the clock again.

The residual heat indicator does

not come on.

The cooking zone is not hot be-

cause it operated only for a short

time.

If the cooking zone must be hot,

speak to the service centre.

Steam and condensation collect

on the food and in the oven.

You left the dish in the oven for

too long.

Do not keep the dishes in the

oven for longer than 15-20 mi-

nutes after the cooking ends.

If you cannot find a solution to the problem

yourself, contact your dealer or the service cen-

tre.

The necessary data for the service centre is on

the rating plate. The rating plate is on the front

frame of the oven cavity.

We recommend that you write the data here:

Model (MOD.) .........................................

Product number (PNC) .........................................

Serial number (S.N.) .........................................

www.zanussi.com

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 43 44

Comentarios a estos manuales

Sin comentarios

Zanussi ZCV660MW Manual de usuario Pagina 17

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Zanussi ZCV660MW