Zanussi ZCG21211XA Manual de usuario Pagina 12

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 28
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 11
Oven - Using the accessories
WARNING!
Refer to Safety chapters.
Inserting the accessories
Wire shelf:
The wire shelf has a special shape in
the rear which help with the heat
circulation.
Put the shelf on the correct shelf position. Make
sure it does not touch the back wall of the oven.
Tray:
Do not push the baking tray all the
way to the back wall of the cavity.
This prevents the heat from
circulating around the tray. The food
may be burnt, especially in the rear
part of the tray.
Put the tray or deep pan on the shelf position.
Make sure it does not touch the back wall of the
oven.
Using the turnspit
WARNING!
Be careful when you use the
turnspit. The forks and the spit are
sharp. There is a risk of injury.
WARNING!
Use oven gloves when you remove
the turnspit. The turnspit and the grill
are hot. There is a risk of burns.
The turnspit does not stop if you
open the oven door.
CAUTION!
The maximum weight permitted on
the turnspit is 4 - 5 kg.
A B
C
D
A) Support hook
B) Forks
C) Spit
D) Handle
1. Open the oven door.
2. Put the turnspit handle into the spit.
3. Put the baking tray on the lowest shelf level.
4. Put the support hook into the hole in the top
cavity of the oven.
5. Install the first fork on the spit, then put the
meat on the turnspit and install the second
fork. Make sure that the meat is in the
middle of the spit.
12 www.zanussi.com
Vista de pagina 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Comentarios a estos manuales

Sin comentarios