Zanussi ZCG21211XA Manual de usuario descargar pdf (Pagina 24)

2. Release the burner injector with a 7 mm

socket spanner and replace it with a right

one.

3. Assemble the burner in a reverse sequence.

Before you fix the screw, make sure that the

burner is pushed correctly to the back

panel.

Test the grill injectors.

Electrical installation

WARNING!

The manufacturer is not responsible

if you do not follow the safety

precautions from Safety chapters.

This appliance is supplied with a main plug and

a main cable.

WARNING!

The power cable must not touch the

part of the appliance shown in the

illustration.

Energy efficiency

Product information for hob according to EU 66/2014

Model identification ZCG21211XA

Type of hob Hob inside Freestanding Cooker

Number of gas burners 4

Energy efficiency per gas burner

(EE gas burner)

Left rear - Semi Rapid

Right rear- Auxiliary

Right front - Rapid

Left Front - Semi Rapid

55.0%

not applicable

55.0%

Energy efficiency for the gas hob (EE gas hob) 55.0%

EN 30-2-1: Domestic cooking appliances

burning gas - Part 2-1 : Rational use of energy -

General

Hob - Energy saving

You can save energy during everyday cooking if

you follow below hints.

• When you heat up water, use only the

amount you need.

• If it is possible, always put the lids on the

cookware.

• Before you use the burners and pan support

make sure they are assembled correctly.

• The cookware bottom should have the

correct diameters for the burner size.

• Put the cookware directly over the burner

and in the centre of it.

• When the liquid starts to boil, turn down the

flame to barely simmer the liquid.

• If it is possible, use a pressure cooker. Refer

to its user manual.

24 www.zanussi.com

1 2 ... 19 20 21 22 23 24 25 26 27 28

Comentarios a estos manuales

Sin comentarios

Zanussi ZCG21211XA Manual de usuario Pagina 24

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Zanussi ZCG21211XA