Zanussi ZCM661NX Manual de usuario descargar pdf (Pagina 18)

The oven door and its gasket

Before cleaning the oven door, we recommend you

to remove it from the oven.

Before proceeding ensure the oven is

cool and disconnected from the

electricity supply.

Proceed as follows:

1. open the oven door completely;

2. find the hinges linking the door to the oven

(see picture 1);

3. unlock and turn the small levers located on

the two hinges (see picture 2);

4. handle the door by its left- and right-hand

sides, then slowly turn it towards the oven

until it is half-closed (see picture 3);

5. gently pull the oven door off its site (see

picture 3);

6. place it on a steady plan.

Clean the oven door glass with warm soapy

water and a softh cloth only. Never use harsh

abrasives.

Once the cleaning is carried out, refit the oven

door, following the procedure in reverse.

DO NOT clean the oven door while the glass

panels are warm. If this precaution is not

observed the glass panel may shatter.

If the door glass panel becomes chipped or

has deep scratches, the glass will be

weakened and must be replaced to prevent

the possibility of the panel shattering. Contact

your local Service Centre who will be pleased

to advise further.

Models in stainless steel or aluminium:

We recommend to clean the oven door using only a

wet sponge and dry it up after cleaning with a soft cloth.

Never use steel wool, acids or abrasive products

as they can damage the oven surface. Clean the oven

control panel following the same precautions.

The correct operation of the oven is ensured by a

gasket placed round the edge of the oven cavity.

• Periodically check the condition of this gasket. If

necessary, clean it without using abrasive cleaning

products.

)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Comentarios a estos manuales

Sin comentarios

Zanussi ZCM661NX Manual de usuario Pagina 18

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Zanussi ZCM661NX