Zanussi ZCV660MW Manual de usuario descargar pdf (Pagina 16)

What to do if…

Problem Possible cause Remedy

The appliance does not operate. The fuse in the fuse box is released. Control the fuse. If the fuse is re-

leased more than one time, refer to a

qualified electrician.

The hob does not operate. The heat setting is not set. Set the heat setting.

The oven does not heat up. The clock is not set. Set the clock.

The oven does not heat up. The oven is not activated. Activate the oven.

The oven does not heat up. The necessary settings are not set. Make sure that the settings are cor-

rect.

The oven lamp does not operate. The oven lamp is defective. Replace the oven lamp.

The display shows “0.00” and "LED". There was a power cut. Set the clock again.

The residual heat indicator does not

come on.

The cooking zone is not hot because

it operated only for a short time.

If the cooking zone must be hot,

speak to the service centre.

Steam and condensation collect on

the food and in the oven.

You left the dish in the oven for too

long.

Do not keep the dishes in the oven

for longer than 15-20 minutes after

the cooking ends.

If you cannot find a solution to the problem yourself, con-

tact your dealer or the service centre.

The necessary data for the service centre is on the rating

plate. The rating plate is on the front frame of the oven

cavity.

We recommend that you write the data here:

Model (MOD.) .........................................

Product number (PNC) .........................................

Serial number (S.N.) .........................................

Installation

Warning! Refer to "Safety information" chapter.

Location of the appliance

You can install your freestanding appliance with cabinets

on one or two sides and in the corner.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Sin comentarios

Zanussi ZCV660MW Manual de usuario Pagina 16