Zanussi ZCV6602MW Manual de usuario descargar pdf (Pagina 20)

Product number (PNC) .........................................

Serial number (S.N.) .........................................

Installation

Warning! Refer to "Safety information" chapter.

Technical Data

Dimensions

Height 847 - 867 mm

Width 596 mm

Depth 600 mm

Oven capacity 69 l

Location of the appliance

You can install your freestanding appliance with cabinets

on one or two sides and in the corner.

Minimum distances

Dimension mm

A 2

B 685

Levelling

Use small feet on the bottom of appliance to set same lev-

el of cooker top surface with other surfaces

Anti-tilt protection

Caution! You must install the anti-tilt protection. If

you do not install it, the appliance can tilt.

1. Set the correct height and area for the appliance be-

fore you attach the anti-tilt protection.

2. Install the anti-tilt protection 77 mm down from the

top surface of the appliance and 49 mm from the left

side of the appliance to the round hole on a bracket

(see fig.).

Make sure you install the anti-tilt protection at the

correct height.

Screw it into the solid material or use applicable rein-

forcement (wall).

3. You can find the hole on the left side of the back of

the appliance (see fig.). Make sure the anti-tilt protec-

tion fits the hole.

Lift the front of the appliance (1) and put it in the mid-

dle of the space between the cupboards (2). If the

space between the bench cupboards is greater than

the width of the appliance, you must adjust the side

measurement to centre the appliance.

Make sure that the surface behind the appliance is

smooth.

www.zanussi.com

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Comentarios a estos manuales

Sin comentarios

Zanussi ZCV6602MW Manual de usuario Pagina 20

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Zanussi ZCV6602MW